Well, there’s your problem. Your engine isn’t attached to your car. I was going to start working on the drive-line today. I know the flex-disk is shot so I got a new one along with the center bearing for the drive-shaft. As long as the drive-shaft is out, I was going to replace the bushings …
Yes, you are correct. That is my lovely wife tearing up the track in her Volvo wagon. Having agreed to go mostly to humor me, she ended up having a great time. It was fun to watch as she improved throughout the day. I wasn’t driving. I was helping out with the class for a …
At the end of week three I managed to patch together the broken headlight carrier, install a new headlight and re-aim the beams. I managed to save $50 by repairing the broken carrier. The black wheels look slick. Today I installed the new passenger seat (not pictured) I found on bimmerforums for that $50 I …
Since the F-22 isn’t yet registered, I decided to run the MINI at the CDC autocross today. The morning started out quite wet, with a light drizzle falling most of the early morning. Since I was running in the third heat, I took a chance and switched to the R comps, which was the right …
I’m at the end of the second week of this project and have made some significant progress with only a few (unpleasant) surprises. I secured the battery in the trunk (no brick required) and patched the hole in the fender well from the inside — I still have to finish it off on the outside. …
[Click photo for link to full set of photos on Flickr.] After months of a low level search of various message boards and Craigslist, I finally found the car I’ve been looking for: a 1989 E30 325is. I finally got to the point where I’m running in the fastest run group on the track and …
My driving season is split into two parts: there’s the first half that starts once the snow melts and ends when summer swimming starts. The second half picks up after summer swimming and ends around Thanksgiving. This past weekend with the NCCBMWCCA at Summit Point marked the end of the first half. And what a …
I’ve been thinking about making my own front splitter ever since I read this article in Special Projects Motorsports. This got me thinking that a good splitter should be: a). disposable and b). cheap. I then came across this thread about building your own splitter for the MINI. So I got the template and set …
I finally saved enough to get a limited slip differential installed at Behe Performance. Here’s what it looked like the day after I dropped it off: I was able to get the Quaife LSD through a great group buy on NAM. The price was almost $700 less than I’ve seen it listed at some (unnamed) …
The car is a R56 2008 Cooper S Automatic. The color is Sparkling Silver, not my favorite, but not as bad as most of the press has made it out to be. It seems like a color that belongs on a Camry, not a MINI, but it sort of fits a theme: the Camryzation of …